Contents
- SUPPORT MENU
- Activities
- Announcements
- Research Themes
- Facilities
- CONTACT MENU
- Organization
- Access
Research Themes
REPORT OF THE INDUSTRIAL RESEACH INSTITUTE OF ISHIKAWA
2011 No.60 |
|
| The Development of Resin Dies for Large Press Forming | Mitsuhiko TAKA, Toshiharu MINAMIKAWA, Masato KASAMORI, Mutsuaki KOBAYASHI, Kenichi SAKATA and Noriyoshi YOSHINO |
| Development and Applications of Ultrasonic Linear Motors with Independent Electrodes - Miniaturization and Resolution Upgrading of Optical Instruments through the Use of Ultrasonic Linear Motors - |
Masahiro TAKANO, Kenichi HIROSAKI, Yuta YOSHIDA and Ryuji SHINTANI |
| Glass Plate Cutting Using an Elliptical Vibration Actuator | Kenichi HIROSAKI, Yorihiro YAMASHITA, Masahiro TAKANO, Takashi KONDA and Yuta YOSHIDA |
| Flow Properties of Dilatant Fluid and its Application to Lapping | Takashi KONDA, Kenichi HIROSAKI and Masahiro TAKANO |
| Investigation of Reduction in Distortion of Dies due to Heat Treatment Coating - Decrease of Heat Strain Based on the Results of Shape Measurement and Heat Treatment Simulation - |
Taisei YACHI, Kaname FUJII, Katsuyuki FUNAKI and Takashi KONDA |
| Development of an FPGA System Loaded with Linux - An FPGA System with the Functions of Screen Display and Networking - |
Yuji YONEZAWA and Youich TAMURA |
| Development of the Function of Wiring Tools for Detecting the Locations of Electric Parts - Application of the Image Processing Technique to Harness Wiring- |
Takehiro KASAHARA, Yoshihiro UEDA, Yuji YONEZAWA, Tomohiro IKEDA, Hideaki KITAMORI, Masahiro HIGASHIDE and Susumu WASADA |
| Consideration of the Quality Evaluation Technique for the Development of Textiles - Preparation of a Manual for Quality Evaluation using the Yarn Inspection System - |
Osamu YOSHIMURA, Daisuke MORI, Ikuei DONJOU, Keisuke MORITA, Jun KAMITANI, Wataru OKUMURA, Miyuki TSUCHIDA and Mayumi MATSUBARA |
| Functionalization and Application of Aramid Fiber by Exposure to Active Gas | Keisuke MORITA and Yasunari SAWANOI |
| Study of Composite Thermoplastic Materials - Molding of Fibrous Composite Materials by the Commingle Method - |
Wataru OKUMURA, Mitsugu KIMIZU and Hiroyuki HASEBE |
| Quality Improvement of Insulating Fire Bricks and Development of Production Technology with Low Environmental Impact | Naoya SASAKI, Takeshi TOYODA, Kazuichi KITAGAWA and Hiroyuki TABATA |
| Development of a Functional Drink using Noto-Dainagon Adzuki Beans | Harumi TAKE, Yoko KATSUYAMA, Toshihide MICHIHATA, Shizuo NAKAMURA, Mio HAYASHI, Toshiki ENOMOTO and Hidehiko KUMAGAI |
| Study on Energy-efficient Processing Technology for Functional Ceramics - Development of a Low-temperature Synthesis Method for Thermoelectric Oxides Involving Soft Solution Processing - |
Takeshi TOYODA, Naoya SASAKI and Kazuhiro SHIMADA |
| Support for the Development of Illuminated Advertising Pillars with an Eco-Hybrid Generator -Development of a High-Efficiency Control Circuit for Wind-Powered Generators- |
Youich TAMURA, Yoshihiro UEDA, Takehiro KASAHARA and Yoshinori FUTAKI |
| Support for the Development of New Products Using Computer Graphics by Companies in Ishikawa Prefecture -Development of Cloth Spoke Covers for Wheelchairs and Bags Made of Wood Veneer- |
Yoshiaki MATSUYAMA, Yuko YOKUBO, Noritaka KAJII, Yukie SUGIURA and Mitsuyosih MAEKAWA |
| Development of Liqueur Production Technology Using Grape Lees -Fermentation and Distillation of Grape Lees- |
Harumi TAKE, Shizuo NAKAMURA, Toshihiro YANO, Akinori NOGUCHI, Fuminori MORIYAMA, Yuzuru YOSHIDA, Haruo JYOUTEN and Yoshio KAZUMA |
| Abstract of papers contributed to other societies | |
 |
|
2010 No.59 |
|
| Study on Fine Spot Joining of Aluminum Alloy Sheets | Katsuyuki FUNAKI, Yoshinori FUNADA and Takashi KONDA |
| Development of a Portable Instrument for Non-Destructive Hardness Testing of Metal Materials Using X-Ray Diffraction - Non-Contact and Non-Destructive Evaluation for Hardness of Metal Material - |
Shigeki TAKAGO, Haruyuki YASUI, Akichika NAKASHIMA, Kenji SAKURAI, Toshihiko SASAKI and Yukio HIROSE |
| Research on the Counter-Pressure Casting Process for High-Quality Al Alloy Casting Products - Development of a Sand Mold Counter-Pressure Casting Machine, and Castability Evaluation of Al Cast Alloy - |
Kaname FUJII , Taisei YACHI, Akihiro UEMURA, Yoshiharu TANIDA, Koichi KOMAI and Noboru SUNAYAMA |
| Development of an Air-Cooled High-Power Diode Laser Unit, and Its Application to Surface Heat Treatment | Yoshinori FUNADA, Kenichi HIROSAKI, Akichika NAKASHIMA and Takashi KONDA |
| Development of a Verification System for Color Universal Design for Color-Blind People | Mitsuyoshi MAEKAWA and Kei ITO |
| Research on Sensing Technology Using Photodiodes | Katsuaki HAYASHI and Yasushi TACHIBANA |
| Development of Dishwasher-Safe Lacquerware Using Nanoparticles | Toshiro EGASHIRA, Yukiyo FUJISHIMA, Noritaka KAJII, Masato KASAMORI, Masato KAIDO and Hiroyuki OKA |
| Development of a High-Performance Synthetic Polymer Using Ultraviolet Polymerization - Towards the Development of an Absorptive Textile - |
Jun KAMITANI, Wataru OKUMURA and Kazumasa HIROGAKI |
| Development of a 3-D Braid for Tubular Carbon Fiber Reinforced Plastic | Daisuke MORI, Osamu YOSHIMURA, Keisuke MORITA, Akihiro NAGAI and Masaharu SHINOKUBO |
| Study of an Urushi Coating Technique for Inorganic Materials - Development of Urushi-Glasses Pretreated by Primers - |
Noritaka KAJII, Yukiyo FUJISHIMA and Toshiro EGASHIRA |
| Development of Textile Products for the Care of Babies and Children | Yukie SUGIURA, Haruaki MATSUYAMA, Yuko YOKUBO and Keisuke MORITA |
| Development of Highly Functional Foods Using Soybean Whey and Okara - Fermentative Condition of Lactic Acid Bacteria and Evaluation of Trial Food Products - |
Harumi TAKE, Yoko KATSUYAMA, Toshihide MICHIHATA, Shizuo NAKAMURA, Hidehiko KUMAGAI,Osato MIYAWAKI, Toshiki ENOMOTO, Hiroshi MATSUI and Masao KAWASHIMA |
| Development of Rust Prevention Film by Using Organic Monolayers | Kazuhiro SHIMADA , Takeshi TOYODA and Naoya SASAKI |
| Volatile Compounds of a Traditional Fermented Food, Aji-No-Susu, in Noto | Yoko KATSUYAMA, Toshihide MICHIHATA, Toshihiro YANO and Takashi KUDA |
| Synthesis of Fragrance Formation Using Microbial Enzymes | Yoko KATSUYAMA , Toshihide MICHIHATA , Shizuo NAKAMURA ,Hiromichi MINAMI, Takane KATAYAMA and Hidehiko KUMAGAI |
| Adsorption Properties of Toxic Metals on Mesoporous Silica | Tetsuya SASAKI, Kazuhiro SHIMADA and Hiroyuki TABATA |
| Research on Lowering the Burnt Temperature for Lead-Free Clear Overglaze Color | Hiroyuki KIMURA and Hiroshi TAKAHASHI |
| Research on Kutani Ware for Use in Meal Service | Hiroshi TAKAHASHI, Hiroyuki KIMURA and Kentaro OHASHI |
| Abstract of papers contributed to other societies | |
|
|
2009 No.58 |
|
| Development of Environmental Friendly Copper Alloy for Metal Bearings | Katsuyuki FUNAKI and Iwao AKASHI |
| Study on Shape Prediction in Plastic Forming | Ryuji SHINTANI and Masahiro TAKANO |
| Development of a Compact Hybrid Hydraulic System - Application to the Power Unit of Robot Systems Working in Tight Spaces - |
Akichika NAKASHIMA, Takashi KONDA, Yoshinori FUNADA, Kenichi HIROSAKI and Hiroaki SEKI |
| Development of a Compact Fluorescence Detection Device | Yuji YONEZAWA, Kouichi NAKANO, Koutaro IDEGAMI, Takeshi YUMINO, Masato SAITOU, Eiichi TAMIYA and Yuzuru TAKAMURA |
| Reduction of electromagnetic wave noise by using analysis in the design of printed-circuit board | Yasushi TACHIBANA, Yoshiyuki YOSHIMURA and Eichi TSUKAZAKI |
| Development of a Sophisticated Data Acquisition Board by Using FPGA | Yuji YONEZAWA and Youichi TAMURA |
| Development of a Measurement System of Material Parameters for the Electromagnetic Absorbers | Hirokazu SUGIURA,Yoshiyuki YOSHIMURA,Yasushi TACHIBANA and Hitoshi NISHIDA |
| Research on the Method of Detecting Void in Resin for Molding Electronic Parts | Jun OKUTANI, Yasuto YONEZAWA and Yoshiteru DOHGUCHI |
| Development of Carbon Fiber Reinforced Plastics by using Braiding Technique | Osamu YOSHIMURA, Daisuke MORI, Keisuke MORITA, Masato KASAMORI, Takashi YAMAMOTO, Akihiro NAGAI, Masaharu SHINOKUBO, Hiroshi SAITO and Junichi MATSUI |
| Study of Functionalization of Super Fiber Materials | Keisuke MORITA and Jun KAMITANI |
| Recycling of Diatomaceous Earth used for Filtration of Beer | Kaduichi KITAGAWA, Naoya SASAKI, Shizuo NAKAMURA, Kazuo YAMANA, Shinsuke TANAKA, and Kazuya ONISHI |
| Study on Magnetic Responsibility for Thermoelectric Oxide | Takeshi TOYODA, Naoya SASAKI and Kazuhiro SHIMADA |
| The Study of Microstructure Control of Ceramics with Micro-Machinability | Naoya SASAKI, Takeshi TOYODA and Kaduichi KITAGAWA |
| Development of a Kutani Ceramic Lampshade Using the Traditional Craft Design Support System | Noritaka KAJII, Tetsuro TAKAHASHI, Haruaki MATSUYAMA, Yuko YOKUBO |
| Development of the "Cobaco" Kutani Box | Haruaki MATSUYAMA, Noritaka KAJII and Yukio YOSHIDA |
| Response to the Tightened Regulations Against Elution of Harmful Substances from Ceramic Ware | Hiroyuki KIMURA |
| Abstract of papers contributed to other societies | |
|
|
2008 No.57 |
|
| Development of Three Dimensional Welding Technique for Products Consisting of Thin foils | Yoshinori FUNADA, Kenichi HIROSAKI and Akichika NAKASHIMA |
| Synthesis and characterization of BN thin films prepared by plasma MOCVD | Haruyuki YASUI and Shigeki TAKAGO |
| Study on High Strength Al Casting alloy for the Machine Parts - Effects of HIP processing and Defects inspection by X-ray CT - | Kaname FUJII and Taisei YACHI |
| Non-destructive Hardness Testing of Steel materials Using X-ray Diffraction | Shigeki TAKAGO, Katsuyuki FUNAKI, Haruyuki YASUI, Kaname FUJII, Toshihiko SASAKI and Yukio HIROSE |
| Development of a Noise-conscious Voice Guide System | Mitsuyoshi MAEKAWA |
| Development of an Authentication System for Improvement of Safe Device Connection | Katsuaki HAYASHI, Hirokatsu NAKAGAWA,Masatoshi MAEKAWA and Haruhiko KIMURA |
| Development of design review support system for designing traditional crafts based on IT and craft's materials | Tetsuro TAKAHASHI, Haruaki MATSUYAMA, Noritaka KAJII, Yuko YOKUBO and Naotaka KATO |
| Development of Inclusion Complex Fixation Technology and its Practical Application -Development of Skin-care Fabric with Cyclodextrin Fixation Technology- | Takashi YAMAMOTO, Mitsugu KIMIZU, Jun KAMITANI, Junsho KANENORI, Eiko TAGUCHI, Katsuhiko YOSHIMOTO, Shinya KITA, Keiji TERAO, Hirokazu SHIGA, Kenji HISADA and Kazumasa HIROGAKI |
| Development of a New Eco-Friendly Dyeing Method for Ink-jet Print in Textiles Using a Visible Laser | Yasunari SAWANOI, Daisuke MORI, Keisuke MORITA, Jun KAMITANI and Toshio KUROBORI |
| Development of Textile Products utilized Traditional Techniques - Development of Textile Products using trait of Ishikawa - | Yukie SUGIURA, Haruaki MATSUYAMA, Yuko YOKUBO and Daisuke MORI |
| Study on Small-quantity Fermentation for Selection of Rice Variety for Junmai-shu | Yukinobu YAMADA, Akira MATSUDA and Shouji MIWA |
| Study on General Components and Function of Traditional Fermented Foods in Ishikawa Prefecture | Harumi TAKE, Yoko KATSUYAMA, Yukinobu YAMADA, Toshihide MICHIHATA, Shizuo NAKAMURA, Toshiki ENOMOTO, Takashi KUDA and Hajime TANIGUCHI |
| Study on fabrication techniques of ceramics thermoelectric device | Takeshi TOYODA, Naoya SASAKI and Kazuhiro SHIMADA |
| Research for Improvement of Lead-free Clear Overglaze Color | Hiroyuki KIMURA and Hiroshi TAKAHASHI |
| Study on Kutani-ware Quality Improvement | Hiroshi TAKAHASHI and Hiroyuki KIMURA and Kentaro OHASHI |
| Abstract of papers contributed to other societies | |
|
|
2007 No.56 |
|
| Development of an Analyzer for Localized Surface Plasmon Resonance Chip for Disease Diagnosis | Kouichi NAKANO and Yuji YONEZAWA |
| Custom-made Design of Artificial Hip Joint with Application of X-ray CT Image | Kenichi HIROSAKI, Akiya NAKASHIMA, Yoshinori FUNADA, Kazuhiro SHINTANI and Ayumi KANEUJI |
| Study on Damage Assessment of Machines | Masahiro TAKANO and Ryuji SHINTANI |
| Development of Micro-drilling Method Combined with Laser Pre-hole Processing | Yoshinori FUNADA, Kenichi HIROSAKI and Akiya NAKASHIMA |
| Development of FPGA-based High-speed Signal Processing Boards | Yuji YONEZAWA,Youichi TAMURA and Sukeyasu KANNO |
| Research on the Processing of Glass Micro Reactor Paths | Yoshiteru DOUGUCHI, Yasuto YONEZAWA and Jun OKUTANI |
| Development of an Evaluation Technique for Wave Absorbers for Circularly Polarized Electromagnetic Waves | Yoshiyuki YOSHIMURA, Yasushi TACHIBANA, Hitoshi NISHIDA, Satoshi YAGITANI and Isamu NAGANO |
| Development of High-performance Biodegradable Plastic Using Advanced Composite Technology | Takashi YAMAMOTO, Wataru OKUMURA and Jun KAMITANI |
| Development of a Method for Reducing Vibration and Noise of Jet-looms | Daisuke MORI, Ikuei DONJYOU, Ryuji SHINTANI, Masahiro TAKANO, Toshiyasu KINARI, Atsushi HIRAI and Yoshiyuki YONEJIMA |
| Development of Healthcare Fiber Materials | Keisuke MORITA, Yukie SUGIURA and Jun KAMITANI |
| Development of Antimicrobial Coating Material from Natural Polymers | Osamu YOSHIMURA, Katsuhiko YOSHIMOTO and Satoshi OSAWA |
| Surface Treatment Technology Using Excimer Laser Radiation for Increased Water Repellency | Mitsugu KIMIZU, and Wataru OKUMURA |
| Development and the Evaluation of Shock-Absorbent Floor Material | Yukiyo FUJISHIMA, Ikuei DONJYO, Toshiro EGASHIRA,Osamu YOSHIMURA, Daisuke MORI, Masato KASAMORI and Yoshiaki KITANO |
| A Study on Urushi Film for Outdoor Use | Toshiro EGASHIRA and Noritaka KAJII |
| A Study of a Rapid Method for Detecting Bacteria in Food | Yoko KATSUYAMA, Tomomi INOUE, Shizuo NAKAMURA, Hiroe KODAMA, Sanae KURAMOTO,Takane KATAYAMA, Toshihiro YANO and Hidehiko KUMAGAI |
| A Study on Lead Adsorption Property of Synthesized Mesoporous Silicas | Tetsuya SASAKI, Kazuhiro SHIMADA and Hiroyuki TABATA |
| Development of Synthesis Technology for Ceramic Materials by Means of the Hot Isocratic Press Method -Microstructure Control of Machinable Grass Ceramics- |
Takeshi TOYODA, Naoya SASAKI, Kaduichi KITAGAWA and Shizuo NAKAMURA |
| Research on Modification of Glaze Property | Hiroshi TAKAHASHI and Kazuo WAKABAYASHI |
| Development of Computer Designing Process for Diversification of Porcelain Shapes | Hiroaki TAKA |
| Abstract of papers contributed to other societies | |
|
|
2006 No.55 |
|
| Development of hybrid nano-diamond films formed by PBII (plasma based ion implantation) | Haruyuki YASUI and Kaoru AWAZU |
| Development of Linear Ultrasonic Actuator | Masahiro TAKANO and Ryuji SHINTANI |
| Micro Welding of Thin Foils with Direct Diode Laser Processing | Yoshinori FUNADA, Kenichi HIROSAKI and Akiya NAKASHIMA |
| Development of an Information-Sharing Support System using Web-based Annotation | Naotaka KATO , Yoshihiro UEDA , Katsuaki HAYASHI , Kenichi NAKAGAWA and Susumu KUNIFUJI |
| Development of a Coagulated Product Inspection System Using Image Processing | Yuji YONEZAWA, Sukeyasu KANNO, Takahiro MATSUURA and Motonari AMANO |
| Development of Support System for Establishing Information Security Policy | Katsuaki HAYASHI, Yoshimitsu OOE, Daiki MIZUKAMI and Yoshihiro UEDA |
| Development of Colorblind Vision Simulator for Colorblind Barrier-free | Mitsuyoshi MAEKAWA, Kei ITO, Junro YONEMITSU, Masaki ONO and Tetsuro TAKAHASHI |
| Evaluation of Pores in Cellulosic Fiber | Mitsugu KIMIZU and Wataru OKUMURA |
| Research and Development of Comfortable Clothing for Middle-age Needs | Yukie SUGIURA, Yuko YOKUBO, Keisuke MORITA, Masahito SHIHO, Noritaka KAJII |
| Development of zero emission technology for residual from food processing | Masato KASAMORI, Kazuo YAMANA, Mitsugu KIMIZU, Daisuke MORI, Jun KAMITANI, Yukiyo FUJISHIMA, Toshihide MICHIHATA, Youko KATSUYAMA, Mio HAYASHI, Yoshinori NISHIMURA and Shizuo NAKAMURA |
| Development of a new dyeing method for ink-jet print in textiles | Yasunari SAWANOI, Daisuke MORI, Jun KAMITANI and Toshio KUROBORI |
| Development of water treatment technique with TiO2 catalyst particles | Shizuo NAKAMURA, Yoko KATSUYAMA, Tomomi INOUE, Shigeru KITANO and Kentaro OHHASHI |
| Development of Lead-free opaque Overglaze Color | Hiroyuki KIMURA and Kazuo WAKABAYASHI |
| Mass Production of Jiggering White Porcelain Bodies s | Naoya SASAKI and Kazuo WAKABAYASHI |
| Abstract of papers contributed to other societies | |
|
|
2005 No.54 |
|
| Development of Three Dimensional Microfabrication Technology | Katsuaki SAKAYA, Kenichi HIROSAKI, Yoshinori FUNADA, Tatsuaki FURUMOTO and Takashi UEDA |
| Development of Labor Saving Machine for Peeling Noto Chestnuts | Mitsuhiko TAKA, Tatsuaki FURUMOTO and Shiro MINEKAGE |
| The Mechanical properties and microstructure of cast- AZ91 alloys on heat treatment | Kaname FUJII and Shigeki TAKAGO |
| Development of a Method to Improve Luminance Non-uniformity in LCD | Sukeyasu KANNO, Yuji YONEZAWA, Kouichi NAKANO, Kiyo SUYAMA and Masaki ONO |
| Development of Catalytic Chemical Vapor Deposition Systems for Flexible Organic Light-Emitting Diode Displays | HEYA, Masahiro TAKANO, Yasuto YONEZAWA, Toshiharu MINAMIKAWA, Toshikazu NIKI, Susumu MUROI Shigehira MINAMI, Tetsuo OSONO, Atsushi MASUDA, Hironobu UMEMOTO, Hideki MATSUMURA |
| Development of the Automated DNA Two-dimensional Electrophoresis System and of the Electrophoresis Image Scanner | Kouichi NAKANO, Tomomi INOUE and Yuji YONEZAWA |
| Development of a Gas Sensor Using Organic Film | Yoshiteru DOGUCHI, Yasuto YONEZAWA and Yasushi TACHIBANA |
| Development of the Disposable Thermometer for Detection of Defecation | Yasuto YONEZAWA and Yoshiteru DOUGUCHI |
| Design of a Patch Antenna Based on FDTD Analysis | Yoshiyuki YOSHIMURA, Sukeyasu KANNO, Yasushi TACHIBANA, Youichi TAMURA Hideki KOBAYASHI, Shiro SUGIMURA,Satoshi YAGITANI and Isamu NAGANO |
| Development of functional faber - Development of and Applications forThermochomic Dyestuff Kneaded Fiber - |
Mitsugu KIMIZU, Takashi YAMAMOTO, Yukie SUGIURA, Daisuke MORI, Keisuke MORITA, and Kouzo NISHI |
| Study on the Evaluation of Lacquer Sap Using Near-infrared Spectroscopy - Rapid Analysis of Lacquer Sap Ingredients - |
Toshiro EGASHIRA |
| Study of Design Development Using Simulation Technology - Availability of Virtual Reality and Computer Mannequin Technology - |
Noritaka KAJII, Yuko YOKUBO, Masahito SHIHO |
| Applications for Porous Material | Kaduichi KITAGAWA, Shizuo NAKAMURA, Tachio ICHIKAWA, Toshiro EGASHIRA |
| Study of Functional Food Containing Local Agricultural Products - The Functions of "Kaga-yasai" (Traditional Vegetables of Ishikawa Prefecture) - |
Mio HAYASHI, Toshihide MICHIHATA, Yoko KATSUYAMA, Shoji MIWA Masao KAWASHIMA, Toshihiro YANO and Toshiki ENOMOTO |
| Development of New Immobilization Technology for Microorganisms | Tomomi INOUE, Yoko KATSUYAMA, Shizuo NAKAMURA |
| Research of the Technology and Application about a Design of Glaze | Hiroshi TAKAHASHI , Kazuo WAKABAYASHI |
| Development for Jiggering White Porcelain Bodies | Naoya SASAKI and Kazuo WAKABAYASHI |
| Research into the Application of VR Technology to Ceramic Ware | Hiroaki TAKA ,Yuji YONEZAWA and Noritaka KAJII |
| Abstract of papers contributed to other societies | |
2004 VOL53 | |
| Boss Forming Technology for Magnesium Alloy Sheets | Mitsuhiko TAKA, Kaname FUJII, Masahiro TAKANO and Koji MIYOSHI |
| Development of a Clay Animation System Using Virtual Reality Technology | Yuji YONEZAWA, Sukeyasu KANNO, Yasushi TACHIBANA and Kouich NAKANO |
| A Study of Support Method for Knowledge Sharing in Intellectual Collaborative Work | Naotaka KATO , Yoshihiro UEDA and Katsuaki HAYASHI |
| Modification
of Nanoscale Structure
of Fiber Surfaces - Immobilization of Enzymes on the Surface of Fabrics - |
Keisuke MORITA, Jun KAMITANI and Takashi YAMAMOTO |
| Development of a Weaving System for Fabric Samples | Akichika NAKASHIMA, Daisuke MORI and Ryuji SHINTANI |
| Study on the Design Method Using 3D CG and CAD/CAM System | Noritaka KAJII , Masahito SHIHO and Yuko YOKUBO |
| Establishment
of Zero-emission
Processing Technology
for Organic Sludge
by Multistage Distillation - Chemical Analysis of Sewage Sludge - |
Yukiyo FUJISHIMA, Kaduiti KITAGAWA, Shizuo NAKAMURA and Ryouichi KIZU |
| Development of Thermoelectric Materials Using Magnetic Ceramics | Takeshi TOYODA, Kaduichi KITAGAWA and Shizuo NAKAMURA |
| Development of Gigahertz Electromagnetic Wave Absorber | Kaduichi KITAGAWA, Takeshi TOYODA and Yoshiyuki YOSHIMURA |
| Study
on the Utilization
of Residue from Food
Processing - Miso Fermentation Using the Residue of "Kori-Tofu" - |
Toshihide MICHIHATA, Mio HAYASHI, Yoko KATSUYAMA, Takayuki TUKEGI, Tsuyoshi HIBINO,Masao KAWASHIMA, Toshihiro YANO and Toshiki ENOMOTO |
| Development of Sake Brewing Method Using Roasted Unpolished or Slightly Polished Rice | Akira MATSUDA, Toshihide MICHIHATA , Yoshinori NISHIMURA and Takashi SAMUTA |
| Study on the Utilization and Application of Deep-sea Water | Akira MATSUDA, Toshihisa NAKAMICHI, Yoshinori NISHIMURA, Toshihide MICHIHATA, Yukiyo FUJISHIMA, Yasunari SAWANOI, Mitsugu KIMIZU, Keisukie MORITA and Kiyomitsu NAKAMURA |
| Development of Lead-free Overglaze Color | Hiroyuki KIMURA |
| Case of Failure Analysis of Machine Parts | Kaname FUJII, Shigeki TAKAGO and Kaoru AWAZU |
| The
Evaluation of Solder
Joints Reliability
for Electronic Products - Industrial Research Institute of Ishikawa (50th Report) - |
Yasuto YONEZAWA, Yoshiteru DOUGUCHI, Akira HEYA and Toshiharu MINAMIKAWA |
| Abstract of papers contributed to other societies | |
2003 VOL52 | |
| High Speed Cutting of Titanium Alloy using a Binderless cBN Tool | Kenichi HIROSAKI, Yoshinori FUNADA and Katsuaki SAKAYA |
| Hydrogen Analysis Techniques for DLC Films | Haruyuki YASUI, Kaoru AWAZU and Hiroshi NARAMOTO |
| Development of Semiconductor Material (b-FeSi2 film) for Next Generation using IBSD Method | Akira HEYA, Masaharu HARAGUCHI, Hiroyuki YAMAMOTO, Takeru SAITO,Kenji YAMAGUCHI and Kiichi HOJOU |
| Evaluation of Documents' Approval Support System for Public Office | Yoshihiro UEDA, Katsuaki HAYASHI, Naotaka KATO, Tetsushi UODANA and Haruhiko KIMURA |
| Study of Universal Design Technique for Public Information Terminals | Yuka YAMADA, Tetsuro TAKAHASHI, Mitsuyoshi MAEKAWA, Yoshiaki KITANO and Kayo TERADA |
| Stiffening
Regional Wood and
Application to Interior
Design - Development of New Products Using Hot Pressed Wood of Cedar and Noto-Hiba - |
Masahito SHIHO, Noritaka KAJII and Yasunori KIMURA |
| Development
of High-value-added
Fabric with Silk
Protein Coating - International Joint Research Project with Stazione Sperimentale per la Seta, Italy - |
Takashi YAMAMOTO, Jun KAMITANI, Daisuke MORI,C. PERUZZO, G.M. COLONNA, B. MARCANDALLI and Teruo HORI |
| Development of Shrink Proof Finishing Technique using Ultra High Pressure | Mitsugu KIMIZU, Keisuke MORITA, Jun KAMITANI, Masato KASAMORI, Takashi YAMAMOTO,Toshikazu ABE, Nobuyasu HIRAMATSU and Teruo HORI |
| Development for the Treatment of Waste Oil with the Microorganisms | Tomomi INOUE, Shizuo NAKAMURA and Naoki TSUBOUCHI |
| Formation of Titanium Dioxide Photocatalytic Film and Its Criticism of Functionality | Shizuo NAKAMURA, Youko KATUYAMA, Yukiyo FUJISHIMA, Takeshi TOYOTA,Noriaki SHIMIZU and Kentaro OOHASHI |
| Development of Controlled Releasing Fertilizer by Using Biodegradable Polymers and Agricultural Waste | Akira MATSUDA, Osamu YOSHIMURA, Shizuo NAKAMURA, Takayuki TSUKEGI,Makoto ADACHI, Katsumi MIZUNO, Toshio OGAWA and Satoshi OSAWA |
| Study of Improvement in Plasticity of Porcelain Clay | Naoya SASAKI |
| Research and Development of a Functional Kutani Porcelain Board | Hiroshi TAKAHASHI |
| Study
on System for Preparation
of Colors - Development of database of leaded colors and non leaded colors - |
Hiroaki TAKA |
| Development of Woven Fabrics for New Use | Ikuei DONJOU, Saburo HAMADE, Yukie SUGIURA, Yasunari SAWANOI, Mitsugu KIMIZU,Daisuke MORI, Akichika NAKAJIMA and Ryuji SHINTANI |
| Abstract of papers contributed to other societies | |
2002 VOL51 |
|
| A Study of Evaluation of Electromagnetic Shielding | Yoshiyuki YOSHIMURA, Toshiharu MINAMIKAWA, Isamu NAGANO and Satoshi YAGITANI |
| Development of a System for Trial Manufacturing of Traditional Crafts using Virtual Reality | Yuji YONEZAWA, Kouichi NAKANO, Sukeyasu KANNO and Katsuaki HAYASHI |
| Speaker-dependent Speech Recognition and Application to the Fabric Inspection System | Sukeyasu KANNO, Katsuaki HAYASHI and Yuji YONEZAWA |
| Analysis of Odor Preference and Adaptation Considering Characteristics of Individual Resident | Yoshihiro UEDA, Naotaka KATO, Takashi OYABU and Haruhiko KIMURA |
| The Development and Study of Glorious Urushi Cortings | Toshiro EGASHIRA, Noritaka KAJII and Makoto SAKAMOTO |
| Development of Fiber Material Colored with Functional Pigments | Yasunari SAWANOI, Mitsugu KIMIZU, Keisuke MORITA and Jun KAMITANI |
| Development of Piezoelectric Device for Medical Micro Machine | Kaduichi KITAGAWA, Takeshi TOYODA, Akira MATSUDA, Kazuo YAMANA, and Katsuaki SAKAYA |
| Development of the Electromagnetic Absorption Materials | Takeshi TOYODA, Kaduichi KITAGAWA, Yoshiyuki YOSHIMURA and Kazuo YAMANA |
| A
Regional Approach
to the Waste Water
Purification - A Study on the Decomposition of the Organic Liquid Waste by the High Temperature and High Pressure Water - |
Masato KASAMORI, Takashi YAMAMOTO, Tomomi INOUE, Shizuo NAKAMURA, Masaki MIYAMOTO,Osamu MIYAKAWA, Keiu KITADA, Hideo OKA and Shigeru USHIJIMA |
| Development of Underground Fire Prevention Tank for External High Pressure | Tatsuaki FURUMOTO, Mitsuhiko TAKA and Hideki TOUZAKI |
| Reuse of Oyster Shell Resources as Civil Engineering Materials | Masaki MIYAMOTO, Katsuya TANIGUCHI, Mikio YAMADA and Sinshiro HANA |
| Abstract of papers contributed to other societies | |
2001 VOL50 |
|
| Development of Precision Cutting by Pulsed YAG Laser | Yoshinori FUNADA and Katsuyuki FUNAKI |
| Preparation of SiNx Passivation Films for PZT Ferroelectric Capacitors by Catalytic Chemical Vapor Deposition | Toshiharu
MINAMIKAWA, Yasuto
YONEZAWA, Akira HEYA,
Yoshikazu FUJIMORI,
Takashi NAKAMURA, Atsushi MASUDA and Hideki MATSUMURA |
| A Study on the Prediction Technology of Weft Insertion for Jet Looms | Ryuji SHINTANI and Daisuke MORI |
| Research
and Development of
Hybrid Pulse Plasma
Coating (HPPC) System |
Kaoru AWAZU, Haruyuki YASUI, Noriyuki SAKUDO,Eiji SAJI, Yuushi HASEGAWA Takeshi HITOBO, Noriaki IKENAGA, Takayuki SATO, Yukio NAMBO and Kazuo SAITOH |
| Development of New Products by Using the Useful Ingredient of Thujopsis Dolabrata Var.hindai Makino, Noto-Hiba-Practical Use of the Remnants of Ate, the Wood of Ishikawa Prefecture, in the Forest and Lumber mill- | Masahito SHIHO, Toshiro EGASHIRA, Noritaka KAJII and Yasunori KIMURA |
| Extraction of Lipid from the Residue of "ISHIRU" (Fish Sauce) Using Supercritical Carbon Dioxide | Toshihide MICHIHATA, Yoshihiro MATSUDA, Yasuo SADO, Yae MORITA, Rika BAI, Toshihiro YANO and Toshiki ENOMOTO |
| Development of Light Sake using Saccharified Rice (Rei) | Akira MATSUDA, Yoshihiro MATSUDA, Toshihide MICHIHATA and Takashi SAMUTA |
| Preparation of the Foam Block using Waste Paper | Katsuyuki FUNAKI, Yukio NANAYAMA, Yoshimasa SHIMBO, Ken MATSUMOTO, Yukio HIROSE and Yoshiyuki YAMADA |
| Research
on the Recycling
Technology of Abolishing
Glass to the Tile |
Shizuo NAKAMURA, Yukio NANAYAMA and Takeshi OHTA |
| Recycling Technology of PET Bottles in Ishikawa Prefecture | Masato KASAMORI, Shizuo NAKAMURA, Daisuke MORI, Tomomi INOUE, Yukio NANAYAMA and Yoshimasa SHIMBO |
| Development of Portable Color Discrimination System for the Visually Handicapped Persons-Support to Growing up the Welfare Industry- | Mitsuyoshi MAEKAWA, Tetsuro TAKAHASHI, Noritaka KAJII, Tatsuro FURUMOTO, Yoshikatsu HIFUMI, Shinya HASHIZUME and Hideaki ARIYA |
2000 VOL49 |
|
| Development of KANSEI Evaluation Support System for Requirement Analysis | Naotaka KATO, Yoshihiro UEDA and Susumu KUNIFUJI |
| Development of the Sensor System for Defecation | Yoshiteru DOGUCHI, Yasuto YONEZAWA and Yuka YAMADA |
| Analysis of Electromagnetic Shielding Effectiveness | Yoshiyuki YOSHIMURA, Toshiharu MINAMIKAWA, Yoshiteru DOUGUCHI, and Isamu NAGANO |
| Development
of High Strength
Ductile Cast Iron
for the Machine Parts -Study on the Fatigue Strength Behavior of Heat-treated Spheroidal Graphite Cast Iron - |
Katsuyuki FUNAKI, Yoshinori NISHIMURA and Yoshinori FUNADA |
| Development of Fancy Yarn by Using 1/f Fluctuation | Daisuke MORI, Saburo HAMADE and Ryuji SHINTANI |
| Experimental
Study of Environment-conscious
Products -Practical Application of Biodegradable Fiber- |
Takashi YAMAMOTO, Mitsugu KIMIZU, Daisuke MORI, Yoshimasa SHIMBO and Fusao NAGATA |
| Development
of an Automatic Vision
Inspection Technology
Aimed at High Precision and High Speed - Development of a System to Inspect Rodlike Cutting Tools with Specular Reflection for Defects - |
Kouichi NAKANO, Yuji YONEZAWA and Sukeyasu KANNO |
| Preventive Technology of Translucent Urushi Film Discoloration | Tachio ICHIKAWA and Toshiro EGASHIRA |
| Formation of Superhard Thin Films with Excellent Tribological Characteristic by Ion Beam Technology | Haruyuki YASUI, Kaoru AWAZU and Yoshinori FUNADA |
| Development of a Thin Type Drive Unit for Electric Wheelchairs | Mitsuyoshi MAEKAWA, Toshihiro NAKAYABU, Tetsuro TAKAHASHI and Sumio ASADA |
| Development of Biodegradable Resins Derived from Chitosan | Osamu YOSHIMURA, Katsuhiko YOSHIMOTO, Hiroshi SUDA and Kazumasa UEDA |
| Improvement on Surface Properties of Artificial Marble | Masato KASAMORI, Haruyuki YASUI and Kaoru AWAZU |
| Development
of Electromagnetic
Shielding Material -Electromagnetic Shielding Effect of Carbon Fiber Textiles- |
Kazuo YAMANA, Kaduichi KITAGAWA, Yoshiyuki YOSHIMURA and Kentaro OHHASHI |
| Development
of Auto-reverse Tool
of Concrete Gutters
for Roadside - Application of Concurrent Engineering System - |
Tatsuaki FURUMOTO ,Mitsuhiko TAKA and Shinya HASHIZUME |
| Design Development of the Tableware for the School Lunch Made of PET Resin | Masahito SHIHO and Noritaka KAJII |
| Design Development of the Bone Densitometer | Noritaka KAJII and Masahito SHIHO |
| Technical Support for the Development of a Garbage Disposal Apparatus | Tomomi INOUE, Shizuo NAKAMURA, Satoshi ITO and Masao TACHIMOTO |
| The Authentication Acquisition of International Standard for Environmental Management System (ISO14001) | An
international environment
standard (ISO14001)
acquisition working
group 1998A.D. Takashi OKUNO , Tadayoshi TAKENAKA , Katsuaki SAKAYA ,Yasunari SAWANOI ,Yasunari SAWANOI , Sukeyasu KANNO and Toshihide MICHIHATA 1999A.D. Takashi OKUNO , Tadayoshi TAKENAKA , Katsuaki SAKAYA , Yoshinori NISHIMURA ,Yasunari SAWANOI , Sukeyasu KANNO and Kaduichi KITAGAWA |
1999 VOL48 |
|
| The Construction of Ishikawa Welfare Techno-House | Tetsuro
TAKAHASHI, Mitsuyoshi
MAEKAWA, Miyako KISHITANI, Kayo TERADA and Yoshiaki KITANO |
| Adaptive
Controlled Machining
of Titanium Alloy - Decision of Cutting Condition under Constraint of Cutting Temperature - |
Kenichi HIROSAKI, Kaname FUJII and Katsuaki SAKAYA |
| A Study on Processing Technique by Pulsed Laser Irradiation | Yasuto YONEZAWA and Toshiharu MINAMIKAWA |
| Development of Fabrics for Comfortable Clothes | Keisuke MORITA, Kiyomitsu NAKAMURA and Yoshitaka MATSUMOTO |
| Development of the product to which applied preventive technology of URUSHI film discoloration | Tachio ICHIKAWA, Masato SHHIHO, Toshiro EGASHIRA, Noritaka KAJII |
| Development of Techniques for Analyzing Lacquerwares | Toshiro EGASHIRA and Tachio ICHIKAWA |
| Application Development of Refractory Body Consisting of Coal Fly Ash | Kaduichi KITAGAWA, Kazuo YAMANA and Kentaro OHASHI |
| BOD Measurement Method by Using Biochemical Sensor Based on the Luminescence Principle | Masaki
MIYAMOTO, Yoshio
WATANABE, Mizuho
MURAHASHI, Nobuto
MATSUI Daimon IMAEDA, Yukio HIROSE, Eiichi TAMIYA and Kei KITAGAWA |
| Application of Oyster Shell to Metallic Refining Material | Masaki MIYAMOTO, Takayuki MUROTANI, Yukio HIROSE, Tsuneji YAMADA and Ryou YOSHINO |
| Development of Miso Yeasts with High Flavor Productivity | Akira MATSUDA and Shinpei YAMAMOTO |
| Preparation
of "ISHIRU" (fish
sauce) Using the
Accelerated Fermentation
Method and Its Composition of Amino Acids, Oligopeptides and Organic Acids |
Toshihide MICHIHATA, Yasuo SADO, Toshiki ENOMOTO and Toshihiro YANO |
| Guidance on Textile Design and Weaving Technique in the Naka-Noto Area | Ryuji SHINTANI, Yoshimasa SHIMBO, Kiyomitsu NAKAMURA and Saburo HAMADE |
| Guidance of Fittings Design Which is Comfortable to the Needs for Interior Design | Masahito SHIHO, Noritaka KAJII and Kazuhide CHIKAOKA |
| Report
of the International
Research Exchange
Program -Research Exchange on Surface Modification Technique Using Ion Beam in Germany - |
Yoshinori FUNADA |
| Report
of the International
Research Exchange
Program -ReseaInvestigation of Italian weaving technique - |
Daisuke MORI |
1998 VOL47 |
|
| Development of Groupware for Supporting Decision-making | Naotaka KATO and Susumu KUNIFUJI |
| Study of Effective Techniques Used in Cylindrical Forming of Sheet Metal | Mitsuhiko TAKA, Yoshinori NISHIMURA and Toshihiro NAKAYABU |
| The Automation of Diameter Measurement for Cylindrical Parts Using Laser Beam | Katsuaki SAKAYA, Yasuto YONEZAWA,Yoshiyuki YOSHIMURA, Kaname FUJII Nobuyuki TERAI and Hiroshi MAEHASHI |
| Development of Tension Control System Using Fuzzy Theory | Daisuke MORI, Saburo HAMADE, Ryuji SHINTANI and Shigekazu NAKAGOSHI |
| Improvement of Quality for Shingosen Textile | Mitsugu KIMIZU, Yoshitaka MATSUMOTO, Genji NAKANISHI, Ikkuei DONJO Yasunari SAWANOI and KEISUKE MORITA |
| Development of CAD System for Traditional Craft with Virtual Reality | Kouichi NAKANO, Sukeyasu KANNO and Yuji YONEZAWA |
| Development of Speech Recognition Technique under Noisy Environment | Sukeyasu KANNO, Kouichi NAKANO and Yuji YONEZEWA |
| Publication
of the Traditional
Patterns Book by
Using Computer Graphics and Application to the Development of the New products |
Masahito SHIHO, Noritaka KAJII and Senshi TAKANO |
| Effects of H-implantation Energy on the Optical Stability of H-implantedUrushi Films under Photo-irradiacation | Kaoru AWAZU, Haruyuki YASUI, Masato KASAMORI and Tachio ICHIKAWA |
| Lamellar Structure and Elastic Properties of Titanium Aluminide Alloy | Hiroyuki TABATA and Yukio HIROSE |
| Study
on Fish Sause "ISHIRU"(2nd
Report) - Changes in the Composition of Amino Acids, Organic Acids and Nucleotides of during Processing"IWASHI-ISHIRU"- |
Toshihide MICHIHATA, Yasuo SADO and Toshiki ENOMOTO |
| Application to Piezoelectric Ceramics BY Water-tape Casting Method | Kazuichi KITAGAWA, Shizuo NAKAMURA and Masayasu KOITABASHI |
| Applications
of the Sludge from
Water Purification
Plant as Ceramic
Raw Materials -Plasticity of the Sludge from Water Purification Plant- |
Shizuo NAKAMURA, Masaki MIYAMOTO, Kazuichi KITAGAWA, Kentaro OHHASHI and Tsuyoshi OOTA |
| Analysis of Textile Defects by Scanning Electron Microscope (SEM) | Genji NAKANISHI and Yoshitaka MATSUMOTO |
| Manufacturing Technology of Artificial Lightweight Aggregates Using Industrial Waste | Masaki MIYAMOTO, Shizuo NAKAMURA, Kazuo TSUKABAYASHI, Yoshiharu KITAMURA Shouji SAKAMOTO and Yoshiyuki KANARI |
| Introduction of Ohotovoltanic Power Generating System to Industrial Research Institute of Ishikawa | Osamu YOSHIMURA, Shizuo NAKAMURA, Kazuo TSUKABAYASHI, Takashi OKUNO and Hiroshi NOGUCHI |
| Report
of the International
Research Exchange
Program -Investigation of the technological system for the enterprises and the study on semi-dry cutting technology- |
Kenichi HIROSAKI |
| Report
of the International
Research Exchange
Program -Research of dyeing technique for silk fabric and study on coating process for polyester fabric- |
Mitsugu KIMIZU |
1997 VOL46 |
|
| Preparation of Ultra High Strength Ductile Cast Iron by Modified Heat Treatment | Katsuyuki FUNAKI, Yoshinori NISHIMURA, Haruyuki YASUI |
| Development of Measuring Technique for Fiber Structure | Mitsugu KIMIZU, Takashi YAMAMOTO |
| The
Study on Process
Condition of Biodegradable
Polymer -The Effect of the Structure on the Physical Properties of Biodegradable fiber- |
Takashi YAMAMOTO, Mitsugu KIMIZU |
| Practical Application of Preventive Technology against Discoloration of a Lacquerware Bowl | Tachio ICHIKAWA, Toshiro EGASHIRA, Makoto SAKAMOTO |
| Characteristice of Tearing-off and Visible Evaluation of Adhesion on Amorphous Carbon Films | Yoshinori FUNADA, Kaoru AWAZU, Masato KASAMORI, Tadaaki SUGITA |
| Waste Treatment by Using Degradation and Evaluation on Durability of GFRP | Masato KASAMORI, Kaoru AWAZU, Yoshinori FUNADA |
| Evaluation of Degradation of Artificial Marble by Ultraviolet | Masato KASAMORI, Kaoru AWAZU, Yoshinori FUNADA |
| Study
on Immobilization
of Yeast Cells -Immobilization of Yeast Cells Using Calcium Alginate-Dicarboxycellulose Complex Gel- |
Akira MATSUDA, Toshihide MICHIHATA, Yasuo SADO |
| A Proiect to Support the Factories of the Construction Machine Wares in Komatsu Area | Shirou MINEKAGE, Akira UMEDA, Kenichi HIROSAKI, Toshio OURA |
| The Support Technique on Structure Changing of the Industrial Machine and Its Introduction of Guidance Case | Mitsuhiko TAKA, Kenichi HIROSAKI, Shirou MINEKAGE |
| Development of Woven Fabrice Interior | Ikuei DONJOU, Kiyomitsu NAKAMURA, Saburo HAMADE, Gengi NAKANISHI, Ryuji SHINTANI |
| Moisture Absorbability and Emission Ability of Noto-Diatomaceous Earth | Masaki MITYAMOTO, Koushin TAKAHASHI, Yukio HIROSE |
| Report
X of ISHIKAWA High
Technological Satellite
Center -The Study of a New Dyeing Method without a Water Medium using Microcapsule Dye- |
Yasunari SAWANOI |
| Report11
of ISHIKAWA High
Technological Satellite
Center -Investigation of guidance to enterpriese and success in venture business In U.S.A.- |
Katsuaki HAYASHI |
| Abstract of papers contributed to other society etc. | |
1996 VOL45 |
|
| The Internet in at the Industrial Research Institute of Ishikawa | Katsuaki HAYASHI, Yoshihiko UEDA |
| Improvement
of LAN at the Industrial
Research Institute
of Ishikawa -Decreasind the traffic with the Switching HUBs- |
Katsuaki HAYASHI, Yoshihiro UEDA |
| Preparation of ceramics films using laser | Toshiharu MINAMIKAWA, Kazuhito SEGAWA, Yasuto YONEZAWA |
| Study on high strength ductile cast iron prepared by austemper heat treatment | Katsuyuki FUNAKI, Haruyuki YASUI, Yoshinori NISHIMURA, Mitsuhiko TAKA |
| Ultra
Precision Polishing
and Evaluation of
Polished Surface -Ultra Precision Polishing Using Magnetic Fluid- |
Katsuaki SAKAYA, Kenishi HIROSAKI |
| Development of a Testing System for Heald Frames | Ryuji SHINTANI |
| Velicity
Distrubution of Air
Jet lssued from Sub-Nozzles
in Air Jet Looms -Model Sub-Nozzles- |
Ryuji SHINTANI, Ikuei DONJOU, Kazuhide CHIKAOKA |
| A New Dyeing Metod without a Water Medium using Microcapsules | Yasunari SAWANOI, Yoshimasa SHIMBO, Takashi YAMAMOTO, Mitsugu KIMIZU |
| Effects of Structure in the Coated Layer on Warmth-Retaining Properties of Coated Fabrice | Yasunari SAWANOI, Saburo MATSUKAWA |
| The Study of Recycling Textile Waste | Daisuke MORI, Yoshimasa SHINBO, Mitumari TAKIMOTO |
| Development of Reducing an Electromagnetic Noise from a Motor | Yoshiyuki YOSHIMURA, Kouichi NAKANO, Sukeyasu KANNO |
| Development of the method for Non-contact Measuring the Shape of 3D Objects Using a Laser Slit-ray | Kouichi NAKANO, Yoshiyuki YOSHIMURA, Masahito SHIHO |
| A Survey of Traditional Handicraft Patterns and A Proposal of New Artistic Patterns | Hikaru MIZUNO, Masahito SHIHO, Kozo SAKIKAWA, Senshi TAKANO |
| A
Study on the Computer
Aided Design Systems
by Using a CAD-mannequin(2) -A Computer Aided Design System for the Bathroom of the Aged by Ergonomics- |
Masahito SHIHO, Tetsuro TAKAHASHI |
| Accelerated Evaluation of Degradation of Artifical Marble in Hot Water | Masato KASAMORI, Kaoru AWAZU, Makoto SAKAMOTO, Yoshinori FUNADA |
| The
Study on
Fish Sauce "ISHIRU" -Chemical Composition of Commercial "ISHIRU"- |
Yasuo SADO, Toshihide MICHIHATA |
| A
Project to Support
the Enterprises of
the Lacquer Wares
in Yamanaka -Guidance on the Design Development Method of the Lacquer Wares by using the Computer Systems- |
Masahito SHIHO, Tetsuro TAKAHASHI |
| Report VII,VIII,IX of ISHIKAWA High Technological Satellite Center | |
| -Investigation of Nonaqueous Dyeing and Effluent Treatment Technology in Switzerland- | Yasunari SAWANOI |
| -Surface engineering of ceramic materials in Australia- | Kaduichi KITAGAWA |
| -Lacquered wares in Myanmar and their patterns- | Hikaru MIZUNO |
| The Survey Report of the factory and life style in the Southeast Asian Notions | Yoshiji ICHIMARU |
| Abstract of papers contributed to other society etc. | |
1995 VOL44 |
|
| Evaluation of Welding of Different Metal Materials | MINEKAGE, NISHIMURA, TAKA, HIROSAKI |
| Ultra Fine Polishing of Optical Glass Using Electrophoresis Phenomenon | SAKAYA, HIROSAKI |
| Automatic Control of Yarn on teh Preparing Process for Weaving | MORI, TAKAHIRO, TAGAWA, MINAMI |
| Evaluation of Hardness and Adhesion of DLC Films | FUNADA, AWAZU, KASAMORI |
| Viscoelasticity of Urushi Film | EGASHIRA, ICHIKAWA, SAKAMOTO |
| Synthesis of Ceramic Thin Films on Aluminum Substrate for Improvement of the Durability | NAKAMURA, YAMANA, KITAGAWA, OHHASHI |
| Report of ISHIKAWA High Technological Satellite Center Vol.5 | YOSHIMURA |
| Report of ISHIKAWA High Technological Satellite Center Vol.6 | MIYAMOTO |
1994 VOL43 |
|
| Development of Coating Tools with Superior Mechanical Properties by Ion Beam Assisted Deposition | FUNADA, AWAZU, KASAMORI |
| A Study on Reducing Electromagnetic Noise by Using a Shielded Room | YOSHIMURA, NAKANO, KANNO |
| Computer-Aided Product Design Assisting System Using the Data of Human Figure Dimensions | TAKAHASHI, SHIHO, MATSUYAMA |
| Fermntation Tests Using Fusants Between Sake Yeast K-901 and Wine Yeast OC-2 | MATSUDA, MICHIHATA, SADO, MATSUI, TAKESHITA |
| A Basic Technology for the High Power Fuel Cell Based on Ceramics on a Expermimental Single Cell with Solid Electrolyte | KITAGAWA, YAMANA, NAKAMURA |
| A Project for the Propagation of Traditional Patterns | SAKIKAWA, MIZUNO |
| An Actual Condition of the Wearing on the Parts of Shedding Motion | SHINTANI, DONJO, MORI |
| Report of ISHIKAWA High Technological Satellite Center Vol.4 | UEDA |
1993 VOL42 |
|
| Analysis of Dynamic Characteristics for Numerically Controlled Machines | MORIMOTO, NAKAYABU, MINEKAGE |
| Observation of Machined surfaces by Scanning Probe Microscope | HIROSAKI, YOSHIDA, SAKAYA |
| Study on Measurement and Recognition of Three-dimensional Objects for Robot Vision | NAKANO, YOSHIMURA |
| Evaluation of Long Term Creep Deformation for CFRP | KASAMORI, AWAZU |
| Study on Measurement and Evaluation of Urushi | SAKAMOTO |
| Synthesis of Kaolinite Clay and its Application using a Diatomaceous Earth | MIYAMOTO, YAMANA, MINEKAGE |
| Report of ISHIKAWA High Technological Satellite Center in U.S.A. Vol.3 | SADO, YAMAMOTO, TAKAHASHI |
1992 VOL41 |
|
| A Sudy on Practical Use of High Tc Superconducting Film | SEGAWA, MINAMIKAWA, YONEZAWA |
| Preparation of high functional metal matrix composite | FUNAKI, TAKA, NISHIMURA |
| Study on New Technology of manufacturing high performance fiber | TAKAHIRO, YAMAMOTO |
| Study on the prevention of discoloration for black urushi | SAKAMOTO, ICHIKAWA, EGASHIRA |
| Research and Development of Design by Surface Processing and Coating of Metals | SHIHO, TAKAHASHI, MATSUYAMA, SAKIKAWA, MIZUNO |
| Decelopment of Original Products Using Colored Urushi | MIZUNO, TAKAHASHI, SHIHO, SAKAMOTO, ICHIKAWA, SAKIKAWA |
| Making a millite-tube closing the one end | YAMANA, MIYAMOTO, DOI, ARAHORI, NAKAMURA, TERASAKI |
1991 VOL40 |
|
| Development of Computer Network System in I.R.I.I. | UEDA, HAYASHI, MAEKAWA, KATO |
| Study on cutting tecnology of ultra-precision machining | MINEKAGE, MORIMOTO, NAKAYABU |
| Studies on the Technique of Applying the Laser Measurement System | SAKAYA, OHURA, HIROSAKI |
| A study on the method of evaluating comfortability of clothes in a state of wearing from the point of physical properties of fabrics | MATSUMOTO, TOMISAWA, NAKANISHI, SUGIURA, NAKAMURA, KUBO, EMORI, TANAKA |
| A study on Multicolor Knitting by CAD/CAM System for Knitted fabrics | SUGIURA, DONJOU, SHINTANI |
| A Measurement System of Eye-mark for Work Analysis | KANNO, SAKIKAWA |
| Study on Application of Zirconia Ceramics | NAKAMURA, YAMANA, KANNO, YOSHIMURA, GEHO, INA |
| Report of ISHIKAWA High Technological Sattellite Center in U.S.A. Vol.2 | TSEKABAYASHI, KATO, KANNO |
Return to Home Page